Audio engineering

Mixing vs Mastering Explained

Who can mix and master my song in Calgary, and do I even need both? Here is the difference between mixing and mastering in plain language, plus how to prepare your files so your engineer can do their best work.

Layered equaliser curves drawn in fine white lines across a black background

The short answer

Mixing shapes the individual parts of your song, such as the vocal, drums, bass and instruments, so they work together. Mastering is the final step. It polishes the finished stereo mix and sets the loudness so your song plays properly on Spotify, Apple Music, YouTube and everywhere else.

Think of it like a film. Mixing is the edit, where every shot is chosen and balanced. Mastering is the final colour grade and quality check before it reaches cinemas. Both happen after the performance is recorded, and most releases need both.

What mixing is

When you record a song you end up with separate tracks. One for the lead vocal, more for doubles and harmonies, and many for the beat. A mixing engineer blends those tracks into one stereo file.

What a mixing engineer does

  • Balance. Setting the volume of every track so nothing is buried and nothing is harsh.
  • EQ. Cutting and boosting frequencies so each sound has its own space. The kick and the bass stop fighting. The vocal cuts through.
  • Compression. Controlling the gap between the quietest and loudest moments so the vocal stays present on every word.
  • Space. Adding reverb and delay to give depth and size.
  • Panning. Placing sounds left, right and centre so the mix feels wide.
  • Automation. Moving levels and effects through the song. The hook lifts. The verse pulls in close.
  • Vocal work. Editing, timing, pitch correction and de-essing so the performance sounds finished.

A mix is where creative choices are made. Two engineers can mix the same session and return two different records. That is why you should choose a mixing engineer whose past work you like, not just the nearest or the cheapest.

What mastering is

Mastering starts when the mix is finished. The mastering engineer works on the single stereo file, not the separate tracks.

What a mastering engineer does

  • Final tone. Small EQ moves that make the whole song a little clearer, warmer or brighter.
  • Loudness. Raising the level to a competitive volume without crushing the life out of it.
  • Consistency. Making every song on an EP or album sit at a matching level and tone.
  • Translation. Checking the song on studio monitors, headphones, phones and car speakers so it holds up anywhere.
  • Delivery. Exporting the correct file formats for streaming services, video and performance.

Mastering changes less than people expect. If you can hear a huge difference after mastering, the mix probably had problems that should have been fixed earlier.

Mixing vs mastering at a glance

Mixing Mastering
Works on Separate tracks or stems One finished stereo file
Main goal Balance, clarity and feel Polish, loudness and consistency
Size of changes Large and creative Small and precise
Happens After recording After mixing
Can it fix a bad vocal? Often Rarely

Do you need both?

For a song you plan to release, yes. Here is a quick way to tell where your song stands.

  • You have separate vocal tracks and a beat. You need mixing, then mastering.
  • You have one file where the vocal and beat are already combined. It may be mixed already. A mastering engineer can tell you whether the mix is ready or needs more work first.
  • You bought a beat as a single stereo file. That is fine. An engineer can mix your vocals to a two track beat, though tracked out stems give a better result.
  • You are releasing an EP or album. Mastering matters even more, because it makes the songs sound like they belong together.

Many artists book mixing and mastering in Calgary as one service. It is simpler, and the engineer can mix with the master in mind.

How to prepare files for mixing

Clean files save time and get you a better mix. Follow this checklist.

  1. Export every track as its own WAV file. Use 24 bit and the same sample rate the session was recorded in, commonly 44.1 or 48 kHz.
  2. Start every file at the same point. All tracks should begin at bar one so they line up when imported.
  3. Turn off effects on the master bus. No limiter, no compressor across the whole song.
  4. Leave headroom. Peaks should stay well below clipping. If the meters hit red, turn it down and export again.
  5. Decide about effects on the tracks. Send vocals dry unless an effect is part of the creative idea. If you love a certain delay throw, send it as a separate file too.
  6. Label clearly. Lead Vox, Hook Double L, Adlibs, Kick, 808. Not Audio 14.
  7. Include a rough mix. It shows the engineer what you were hearing and aiming for.
  8. Send references. One or two released songs with the sound you want.
  9. Add notes. Tempo, key, and anything specific, such as keeping the vocal dry in the second verse.

Put everything in one folder, zip it, and send a single link.

How to prepare a mix for mastering

If someone else is mixing and you only need mastering, send:

  • A stereo WAV file at the session sample rate, 24 bit.
  • With no limiter on the master bus and a few decibels of headroom.
  • No fades cut too tight at the start or the end.
  • Your reference songs and the order of the tracks, if it is a project.

A quick word on loudness

Streaming services turn songs up or down so listeners are not reaching for the volume control between tracks. This is called loudness normalisation. Spotify, for example, plays music back at around -14 LUFS by default. LUFS is a measure of how loud a track sounds over time.

What that means for you is simple. Louder is not automatically better. A master that is crushed to be as loud as possible gets turned down by the platform and ends up sounding flat next to a more dynamic song. A good master is loud enough to compete and open enough to breathe.

How revisions work

Almost no mix is perfect on the first pass, and that is normal. Here is how to give notes that get results.

  • Listen on several systems before you write anything. Phone, earbuds, car.
  • Wait a day if you can. Fresh ears are honest ears.
  • Be specific and use timestamps. "Vocal feels quiet in the second hook at 1:42" beats "make it pop more."
  • Collect all notes in one message. Ten separate texts lead to missed notes.
  • Say what you love, not just what to change, so it does not get lost in the next version.

Can you mix and master your own music?

You can, and learning will make you a better artist. The hard part is not the tools. It is perspective. After hearing your song two hundred times, you stop hearing it the way a new listener does. An outside engineer brings fresh ears, a room they trust and experience with how records in your genre are supposed to feel.

A sensible path for independent artists is to demo and rough mix at home, then send the songs that matter to a professional. If you recorded at home and are unsure whether the vocal is usable, send it over. In many cases, editing, noise reduction and careful mixing can save it. If you would rather start with a strong recording, read where to record vocals in Calgary.

Remote mixing across Canada

Mixing and mastering travel well. You do not need to sit in the room. I offer mixing in person in Calgary and remote mixing for clients across Canada. You upload your files, I send a first mix with notes, and we refine it together until it is right. Podcasters can use the same process, covered in the guide to podcast production in Calgary.

Frequently asked questions

What is the difference between mixing and mastering?

Mixing blends and shapes the separate tracks of a song into one balanced stereo file. Mastering polishes that finished file and sets its loudness and tone for release. Mixing comes first, mastering comes last.

Who can mix and master my song in Calgary?

Jorden James offers mixing and mastering in Calgary and online across Canada for $350 per song, with three revision rounds included. Send your stems and a reference through the contact page to get started.

Can mastering fix a bad mix?

Only slightly. Mastering can improve tone and loudness, but it cannot rebalance a buried vocal or a muddy low end. Those problems need to be fixed in the mix.

What does LUFS mean?

LUFS stands for Loudness Units relative to Full Scale. It measures how loud audio sounds over time. Streaming services use it to play songs at a similar volume.

Can you mix vocals over a two track beat?

Yes. A two track beat is a single stereo file of the instrumental. Vocals can be mixed to it well, although separate stems give the engineer more control.

How many revisions should a mix include?

It varies by engineer, so check before you book. A mix and master with Jorden James includes three revision rounds. What matters is that the number is agreed in writing before the work starts.

Need this done properly?

This guide is part of my audio engineering service in Calgary. If you would rather hand the work to someone who does it every week, tell me about your project and I will reply with a clear plan and quote.

Start a project

Keep reading

Start a project

Tell me about your project

Send a few lines about the song, show or shoot. You get a personal reply, usually within one business day.

By sending this form you agree to be contacted about your enquiry. Your details are never sold. See the privacy policy.